How to configure PPTP protocol on D-Link router

  • • Before you configure "PPTP" protocol on your router you need to make sure that you are able to connect VPN on your PC via PPTP protocol.
  • • Moreover, the router you are about to configure PPTP protocol must have "Internet Access".
  • • The router in question is a separate router, not the one provided by your "Internet Service Provider(ISP)".
  • • Refer to the following diagram and make sure the configuration is identical.
  • 1. Now access the router's GUI by typing "" in your web browser and press enter.
  • 2. The username is "admin" and the password should be left blank.
  • 3. From left side bar click the internet setup and change WAN access type to DHCIP Client
  • 4. From left sidebar select PPTP then Setup on top bar, enable check option, now enter CASVPN username and Password.
  • 5. Click apply and go to status tab.

Need help? Contact the CasVPN Support Team for immediate assistance.

Was this article helpful?

Have more questions? Submit a request

Copyright © 2020 CASVPN. All rights reserved.